Machine for Cladding
The main feature of SKFR-05 MACHINE FOR CLADDING is the extreme flexibility in the processing that allows to obtain holes and kerfs, depending on the configuration required by the customer.
All types of cladding with a single machine.
Kerfs, slot cuts and drilling.
Previous
Next
Technical Data
| TYPE | SKFR-05 |
|---|---|
| Material width | Da 150 a 1000 mm |
| Material length | Da 200 a 1500 mm |
| Maximum thickness of material | Da 20 a 80 mm |
| Cutting blade diameter | 180 mm Foro/hole diam 22.23 mm |
| Drill bit diameter | Da 6 mm a 12 mm |
| Blade / drill motor power | 10 - 40 mm |
| Blade / drill motor power | 1,5 kW / ciascuno |
| Installed power | 10 kW |
| Water Consumption | 5 l/min |
| Compressed air consumption | 30 l/min |
| Overall Dimensions | 4100x3100x2100/h mm |
| Machine weight | 3 t. |
FEATURES
- – Processing of all sides;
- – Processing also different in dimensions and distances for a single load;
- – Extreme flexibility;
- – Configurable with tools based on specific needs;
- – Adjustable speeds according to the hardness of the material;
- Table with belts conveyor to load the machine continuously.
